Asphalt milling is a procedure to remove the top layer of damaged asphalt. This allows a contracting company to lay a new layer of asphalt without raising the height of the pavement.
Asphalt milling, also known as cold milling or cold planning. It is the process of removing part of the existing pavement surface. This helps to restore the pavement to a smooth and even texture, making it ready for use or repaving. Special milling machines can remove different depths of the surface, from just enough to level and smooth out any bumps to a complete removal of the pavement layer.
Asphalt milling allows for the repair or replacement of the top layer of asphalt, like on a road or parking lot, without having to tear down and rebuild the whole structure. The removed asphalt pieces, called millings, can also be recycled and used in resurfacing the pavement.
Milling asphalt pavement is a money saving way to repair and renew surfaces like roads, parking lots, and driveways. By removing the top layer of old asphalt, milling prepares the pavement for a new surface that offers better durability and performance.
ASC Contracting Corp. can help you with the best service of asphalt milling and paving.
What is the purpose of milling asphalt pavement?
Affordability
Are you thinking about the costs?
Contact our contracting company in New York today to see if you require milling asphalt pavement. It’s much cheaper than demolishing and repaving. Additionally, it can prolong the lifespan of your pavement, thus saving you money. The last thing you want is the manufacture of your asphalt driveway or parking lot. Schedule your asphalt pavement milling with us before summer ends.
Milling asphalt pavement is often the best choice if the base underneath is still strong. If the base isn’t strong, milling is only a temporary fix. Cracks in the foundation will soon be visible on the top of the layer. That’s why our experts recommend milling only for pavement that’s in good condition.
No drainage issues
You can only add so many layers of asphalt before it gets too high and water can’t drain properly. When water sits on your pavement, it can cause damage. Water can damage the foundation over time by seeping into potholes and causing fractures. To prevent this, the asphalt milling company removes the top layer of pavement.
Our crew can restore the appearance and functionality of your pavement by removing a few inches of it and then applying a new layer of asphalt.
Fix particular areas
Repairing a tiny section is far less expensive than repaving an entire asphalt parking lot.
Give our milling asphalt pavement company a call if there are cracks or potholes in only one place. With asphalt milling, we can fix the damaged portion of your pavement while leaving the remainder intact. We’ll make sure the area we work on is at the right depth for proper drainage. As a result, water runs off the pavement rather than collecting in the center.
Recyclable
The most recycled substance in the US is recyclable asphalt. It is entirely recyclable!
Following pavement removal, the asphalt millings are sent to a recycling facility. There, they combine the millings with new asphalt. Most importantly, we can use the recycled asphalt for future projects.
Research says Americans recycle 75 million tons of asphalt each year. Keeping asphalt out of landfills is good for the environment.
Milling Asphalt Machine
A milling asphalt machine is the primary tool used in this process. It uses rotating drums with sharp teeth that grind down the top layer of asphalt, creating a smooth surface ready for new asphalt. These machines for milling asphalt pavement come in various sizes. Starting from small units for driveways to large machines for roadways.
Milling Asphalt Driveway
Milling an asphalt driveway can refresh its look and improve durability. The old, worn-out layer is removed, leaving a smooth and stable base. After milling, a fresh layer of asphalt is laid on top, making the driveway look new and last longer. Milling also helps fix issues like cracks and potholes by removing damaged areas, creating a solid foundation for the new layer.
Milling and paving expert
We are ready and willing to prepare your parking lot or street for resurfacing. We remove the damaged top layer of asphalt and make sure the base remains intact. This helps you save money by making the most of your existing pavement.
With a tried-and-true method, our team can mill up to one foot of asphalt, allowing for speedier, cleaner, and more economical disposal. We take great pride in our work as a local Mineola, New York, milling asphalt pavement business. Our staff’s years of experience allow us to ensure the project’s success.
Milling asphalt pavement services near you in New York
A wide range of paving and asphalt milling services are provided by ASC Contracting Corp., in addition to parking lots, buildings, industrial parks, streets, roads, and highways.
We also grind and remove the top layer of old asphalt. Asphalt milling, when done by qualified experts, keeps streets from becoming overly high from years of resurfacing. It also stops costly drainage problems.
Asphalt Recycling and Paving
As a highly professional in milling asphalt pavement work, our aim is to reduce negative impact on the environment. As a leader in asphalt recycling, we are very careful when collecting, treating, and recycling all milled asphalt so it can be reused.
Recycling asphalt minimizes costs and reduces quarrying, mining, and oil consumption. Moreover, it saves natural resources. It also keeps asphalt and other materials out of landfills.
What Type of Asphalt is Best for the Driveway?
“Hot mix asphalt” is the ideal kind of asphalt for driveways. It is a strong, flexible substance that won’t break under various weather conditions and can tolerate high traffic. Hot mix asphalt is usually applied in thick layers, which improves stability and ensures a smoother surface that lasts longer.
Milling Asphalt for Sale
Milled asphalt pavement, also called reclaimed asphalt pavement (RAP), is often available for sale. This recycled material can be used for various purposes, such as creating new driveways, filling potholes, and even resurfacing small roads. Using milled asphalt is environmentally friendly because it uses materials and reduces waste.
Pavement Milling Cost
The cost of milling asphalt pavement varies based on the project’s size and work difficulties. On average, milling costs between $0.25 and $0.75 per square foot, making it an affordable option compared to a complete replacement. Larger areas or complex projects may cost more, while smaller driveways or simple repairs are generally more affordable. Despite the upfront cost, milling is a smart investment because it extends pavement life and improves performance.
How Long Does Asphalt Milling Last?
When properly milled and resurfaced, asphalt pavement can last up to 20 years with regular maintenance. The longevity of asphalt milling depends on factors like the quality of the new asphalt layer, traffic volume, and environmental conditions. With regular seal coating and minor repairs, a milled asphalt surface can remain in good condition for many years.
What are the disadvantages of asphalt milling?
While milling asphalt pavement has many benefits, it does have some drawbacks. First, milling can be noisy and disruptive, especially for large projects. It also generates a lot of dust. These can be a nuisance for the residential areas. Additionally, milled surfaces may need to be stabilized with sealants or binding agents if used in areas with heavy rainfall, as the recycled asphalt may loosen over time.
Recommendation
Don’t wait too long to schedule milling asphalt pavement. The late spring or early fall is the perfect time for completion. If it is not below 50 degrees, the new asphalt layer will not cure adequately. Additionally, there should be minimal to no wind and dry weather.
In conclusion, milling asphalt pavement is a practical solution for renewing driveways, roads, and parking lots. It enhances durability, saves on replacement costs, and helps reduce waste through recycling. With proper care and maintenance, milled asphalt surfaces can offer long-lasting performance and a fresh, smooth appearance for years.
ASC Contracting Corp. is proud to serve Mineola, New York. Please get in touch with us if you require an estimate for asphalt services in New York. It is necessary to discuss your project.